Heavy-Duty 144 Mhz FM Transceiver
High power output, a huge, easy-to-read display, and one-touch WIRES™ Internet Linking Access capability are yours with the rugged new FT-2800M!
65 Watts Power Output Four selectable power output levels are provided: 65/25/10/5 Watts. The power selection may be stored into memory, allowing you to conserve power while using strong local repeaters. Excellent Receiver Performance The FT-2800M’s receiver front end features Yaesu’s renowned Advanced Track Tuning RF input filtering, which affords outstanding protection from Intermodulation distortion. CTCSS and DCS Encode/Decode Built In For easy repeater access, or silent monitoring of busy channels, both CTCSS and DCS (Digital Code Squelch) Encoder/Decoder circuits are built in. CTCSS and DCS configuration data may be stored independently in each memory channel. A “Split Tone” mode also allows operation on systems where CTCSS and DCS are used separately on the repeater uplink/downlink. Extensive Memory System The FT-2800M provides a total of 221 memory channels, including 200 “regular” memories, ten pairs of band-limit memories, and an instant-recall “Home” channel you can dedicate to a frequently-used repeater or simplex frequency. Memories can store repeater shift information, CTCSS/DCS data, power output level, scanning status (“Skip”), and Alpha-Numeric labels. Alpha-Numeric Channel Display Memory channels may be displayed either with the channel frequency or a personalized Alpha-Numeric label, for easy channel recognition. Up to six letters, characters, or numbers may be used for labeling channels. WIRES Internet Linking Access Feature The FT-2800M includes a conveniently-located “Internet” key, for quick access to Internet-linked repeater systems. Internet repeater linking allows you to use your FT-2800M to talk to other Amateurs throughout the world, with outstanding voice signal quality. The “Internet” key may be configured to send either a single DTMF digit, or a DTMF string, for operation on a WIRES™ (Wide-Coverage Internet Repeater Enhancement System) repeater, or on other Internet-linked repeaters using DTMF tone access. For more information on WIRES™,
WX Channels with "Severe Weather" Alert A special 10-channel Weather Band memory bank is provided in the U.S. version, allowing quick access to NOAA weather broadcasts. When the 1050-Hz “Severe Weather” alert tone is transmitted, the FT-2800M may be configured to emit an alarm tone to get your attention quickly. With the “Weather Alert” feature enabled, the FT-2800M will scan the ten Weather memories, stopping only if the 1050-Hz tone is received. MH-48A6J DTMF Direct Access Microphone The backlit MH-48A6J microphone allows direct keypad frequency entry, or keypad memory channel recall. On transmit, the MH-48A6J allows manual entry of DTMF tones for autopatch use, and the FT-2800M also includes a nine-memory, 16-digit DTMF Autodialer. Four user-programmable “soft” keys on the microphone may be programmed for easy control of a number of different features, and the [A]/[B]/[C]/[D] keys replicate the functions of the keys on the front panel of the transceiver, for maximum convenience while driving.
GENERAL |
|
Frequency Range Receive: |
137-174 MHz. |
Frequency Range Transmit: |
137-174 MHz |
Channel Steps: |
5/10/12.5/15/20/25/50/100 kHz |
Frequency Stability: |
Better than +- 10 ppm (-20°C to +60°C) |
Mode of Emission: |
F2D, F3E |
Antenna Impedance: |
50 Ohm, Unbalanced |
Operating temp range: |
-4° to +140°F (-20°C to +60°C) |
Supply Voltage: |
DC 13.8V +-10%, Negative Ground |
Current Consumption (typical): |
|
RX: |
Less than 0.7A (max. audio) |
|
Less than 0.3A (Squelched) |
TX: |
10A (65W) / 7A (25W) / 5A (10W) / 4A (5W) |
Operating Temperature Range: |
-20°C to +60°C (-4°F to +140°F) |
Case Size: |
6.3 x 2.0 x 7.3 inches (w/o knobs) |
|
160(W) x 50(H) x 185(D) mm |
Weight: |
4.0 lb. (1.8kg) |
|
TRANSMITTER |
|
RF Power Output: |
65/25/10/5 Watts |
Modulation Type: |
Variable Reactance |
Maximum Deviation: |
+-5 kHz / + 2.5 kHz |
Spurious Radiation: |
Better than -60dB |
Microphone Impedance: |
2 K Ohm |
0 |
RECEIVER |
|
Circuit Type: |
Double-Conversion Superheterodyne |
Intermediate Frequencies: |
21.7 MHz and 450 kHz |
Sensitivity (for 12 dB SINAD): |
Better than 0.2uV |
Selectivity Wide: (-6/-60 dB): |
12 kHz/28 kHz |
|
|
IF Rejection: |
Better than 70 dB |
Image Rejection: |
Better than 70 dB |
Maximum AF Output: |
3 W into 4 Ohm @ 10% THD |
|
Specifications are subject to change without notice, and are guaranteed within amateur bands only. |
Frequency ranges and repeater shift vary according to transceiver version. |
|
- 1 x Yaesu FT-2800M 65W VHF Band Radio (Version :EXP)
- 1 x MH-48A6J DTMF Hand Microphone
- 1 x Mobile Mounting Bracket
- 1 x Spare Fuse 15 A
- 1 x DC Power Cord w/Fuse
- 1 x Operating Manual
- 1 x Warranty Card
| | | |