Item Name: SR-328 Duplex Repeater Controller with Kenwood cable and Motorola FDC Cable
USD 62.50
USD 71.50
SR-328 Duplex Repeater Controller with Kenwood cable and Motorola FDC Cable
Description
SR-328 Duplex Repeater Controller with Kenwood/china cable and Motorola FDC Cable
Surecom SR-328 Duplex Repeater Controller With K plug Radio connector Cable for PX-777 PX-888 KG-UVD1..,Introduction Radio Range Extender,The SR-328 is a multi-function and cheaper device that connects any handheld or mobile radio.
SR-328 Duplex Repeater Controller with Kenwood/china cable and Motorola FDC Cable
Introduction
Radio Range Extender,The SR-328 is a multi-function and cheaper device that connects any handheld or mobile radio.
By equipment and so on our assemble the build, the new generation trunk-line board, the internal structure design are finer, the outward appearance is more attractive. Besides can provide a the basic repeater function which has following the receiver transmitter, furthermore has the Simple connection, provides the more ideal 2-way radio conversation region for you, causes you maintains the relation in the bigger operating region.
This is a radio duplex repeater controller. It is an easy of operation and cost effective and highly flexible platform for setting up bi-direction band duplex repeater with mobile radio and handheld radio. .
The SR-328 has 2 audio ports input and out , they are used to connect with mobile and handheld radio. DTMF remote control function with password protection is available in the . User can control the repeater ON or OFF remotely by DTMF. Multi-LED display 2 of radio status , and build-in battery Level.
Feature & Specification
-Works with most popular handheld radios
-Multi- LED display 2 radio status , And controller Battery Level
-Real time duplex repeater with link radio
-Allows user to change the DTMF remote control password by radio
-Operates on both build-in Li-ion battery 72 hours long life operation
-External DC 5~24V power supply
-DTMF remote control repeater function ON and OFF with password protection
-Professional manufacturer low power consumption .
Features:
Connector Radio unit:
2
Build in 3.7V Li-ion Battery:
900maH
Ext.DC Jack 5.5/2.1mm:
DC+5V~24V
Standby Time:
180hours
Standby Current:
4mA
Work Current:
20-30mA
SIZE:
110×80×25mm
Operating temperature:
-10°C to +50°C
LED DISPLAY OF SIX
Charge
Red
Charge
Blue
Full
Power /TX Status
Red flash
Power on / standby
Blue
Radio A RX > B TX
blue flash
Sleep mode
Battery Life
4 of Yellow LED
100%
3 of Yellow LED
80%
2 of Yellow LED
50%
1 of Yellow LED
40%
Flash of Yellow LED
10-30%
How to connector Radio : A Input for Radio Received B Input for Radio Transmit
1, The frequency difference between the upper and lower row forwards (and conventional repeater), A machine as a signal uplink receiver, B machine as a signal downlink transmitter. In order to achieve the purpose of the relay.
When the radio units are connected, the received signal on a radio unit will be real time transmit on the other radio unit. ,
Example 1 . Without duplexer and filter Not have a duplexer : two hand-held units connected to a relay station, such as unparalleled workers, two hand sets should be separately using two antennas! Two antennas should be perpendicular to erect! And try to pull the distance between the two! At least not less than 1-5 metre (suggest : the farther the better two distance are Two antenna .)
Radio relay stations in different frequency duplex mode, that is, after receiving the weak signal of a specific frequency emitted far, immediately after synchronization will amplify and transmit the signal power to use another frequency. Who had set up a relay station people are aware, if not diplexers, height and level with two receiving antennas erected distance does not separate, not meet the technical requirements, the relay station is either not working due to self-excited work, or is "call far." This is because the weak signal relay station forwards the signal power at the time, it would be forwarded "drown" the adjacent repeater receiver front-end is a strong signal "closed."
Example 2 . With duplexer
purchase the corresponding frequency / power duplexer using "the joint " of the two hand sets connected to the antenna output terminal of the duplexer transmitter and receiver, respectively, set the frequency corresponding to the handheld units (frequency should be consistent with the duplexer). Under diplexer case, the relay station as long as the need to connect an antenna! And no special attention when erecting antennas !
e.g 1. This SR-328 connects Radio and Duplexer
Example 3 . With Filter This SR-328 connects Radio and Filter
Package Contents
1 x SR328 Duplex Repeater Controller
1 x 100-240V USB power supply unit
1 x USB Power Cord
2 x Kenwood / CHINA Radio connect cable
2 x Motorola/FDC / CHINA Radio connect cable
VERTEX STANDARD MIC :MH-25A8J / MD-11A8J VERTEX STANDARD Radio VX-2000 VX2200 VX-2208 VX-2500 VX2508 VX-3000 ,VX-3200 ,VX-4100 VX-4100E VX-4200 VX-4200E,VXR-1000 VXR-7000
YAESU MH-26G8J,MH-27G8J,FT-2400H,FT-2500M
Cable Detail:
Plug to Radio 8 pin
Plug to Mobile Audio out : 3.5mm x15mm mono.
Plug to Surecom Repeater in : 3.5mm x17mm 4 polo
Pin 1 : Down
Pin 2 : Up
Pin 3 : +5V
Pin 4 : GND
Pin 5 : MIC
Pin 6 : PTT
Pin 7 : GND
Pin 8 : Fast Scan
SURECOM Repeater controller Mobile Cable
8 pin >
50-A
UP
DOWN
+5V
Keypad
50-B1
50-C1
Keypad
N/C
+8V
N/C
50-K
N/C
+8V
N/C
Keypad
50-Q1
50-S
DATA
+8V
Up/Do
+8V out
50-T1
GND
UP
DOWN
+5V
Keypad
50-W1
S.P.out
50-Y2
Fast
Scan
+5V
UP
DO
QYT
CB-27
+9V
GND
MIC
PTT
BQ-8900
N60
GND
PTT
MIC -
MIC +
8 pin >
6PIN
50-K
+8V
N/C
50-Y1
SW2
9600bs
+9V
If your radio model is not listed above, or not sure whether it fit your radio.
Please kindly see our other item or email us your model number, then we will help you find one that suit for you.
ENGLISH MANUAL
How to set function mode from SR-112/SR-328/SR-628/SR-629
FUNCTION / MODEL
SR-112
SR-328
SR-628
SR-629
Repeat
## 71
No Function
Power On
Press Red switch 2 sec.
by Switch
Mode select
No
YES
A- RX control to B-TX mode 1
No
DTMF PUSH PTT "##612"
Switch to LEFT
A- RX control to B-TX
B- RX control to A-TX mode 2
No
DTMF PUSH PTT "##613"
Switch to RIGHT
SLEEP mode on
PUSH PTT DTMF"##28888"
No
SLEEP mode off
PUSH PTT DTMF "##18888"
No
Surecom all model Repeater controller function Compare
