| |
SW102N+GND
Surecom SW102 Ground Plate
A Ground Plane is a flat surface of ferrous metal (Aluminum, etc) that a Ground Plate for heldhand antenna uses as an integrated part of it. A Ground Plate will be better for testing the SWR .
Package include:
1x 1mm Ground Plate
SURECOM UV Digital VHF/UHF Power with SW-102NN Surecom Ground Plate
V.S.W.R. meter Introduction
VSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter .
All Function display ( Frequency counter ,Power watt , SWR ,FW,RW,Battery Level)
Feature & Specification
Frequency range: 125 - 525MHz
Measurable power range: 0.5 - 120W(+-0.5%)
Input read frequency counter (must be < 0.5 W)
Maximum power: 120W
Impedance: 50Ω
Size: W 76 X H 77 X D35 mm.
Weight: < 220 grams
Battery : 3.7V Li-ion Rechargeable Battery
* Not for the digital radio.
Interface: N-J Interface
| Feature & Specification (for version 2.02) |
| MAX. Power in |
120 W
(Measurable power,Radio must be ANALOG) |
| V.S.W.R |
1.00~19.99 |
| Frequency Range |
COVER : 125MHz~525MHz |
| Insertion Loss |
< 0.15dB(VHF) , < 0.3dB(UHF) |
| Temperature |
0℃~60℃ |
| Frequency counter |
Yes ( TX input must be minimum 0.5W + - 0.5%) |
| Battery Display |
Yes |
| Battery Build-in |
3.7V Li-ion Battery |
| Auto Power Off |
1-9 mins |
| Size |
66*68*37 (mm) |
| Charger in |
5V (micro usb) |
| Backlight |
AUTO OFF |
| Interface (in and out ) |
N(SL16) |
| Weight |
220g (include battery) |
Press 2 second the [Red button] to power on or power off
| MENU Display (Note: Version for up to V2.02) |
| No. |
Mode |
Adj |
|
Content |
| 1 |
Adjustment Forward |
-99 to +99 |
0 |
Fine Tune Level % |
| 2 |
Adjustment Reverse |
-99 to +99 |
0 |
Fine Tune Level % |
| 3 |
Adjustment Time Base |
-99 to +99 |
0 |
Frequency Counter ,OSC Time Base |
| 4 |
LCD DIM (Back Light Time) |
0-9 |
1 |
"0" is always on, 1 min to 9 mins |
| 5 |
POWER OFF |
0-9 |
3 |
"0" is always on, 1 min to 9 mins |
* Supplier, the product will add functionality without having to give notice |
- Press MENU [Blue button]
- Press F1 [Red button)(Select 1-5 Function)
- Press [Blue button] ( - ), [Yellow button] (+)
- Press the [Red button ]for 2 seconds
- Press the [Blue button] to SAVE and EXIT
- How to check the S.W.R. of your Antenna :
Connect to "TX" on Radio output and Antenna to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
- Measurement V.S.W.R. : (see Pic.1)
- SW-102N TX connect Radio RF out
- Radio TX , SW-102N with display S.W.R. measure data.
Do not affect the test in the following cases, there are objects nearby, placed horizontally.
- How to check the output Watt of your transceiver :
Connect to "TX" on Radio output and dummy Load to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
- Measurement Power: (see Pic.2)
- SW-102N TX connect Radio RF out
- SW-102N ANT connect 50 ohm Dummy Load
- Push Radio TX , SW-102N display is Power measure data.
(SW-102N is not for DMR system)
- Package Contents
- 1x SURECOM SW-102N-UV Power & SWR Meter (N - connector) (New Version 2.02)
- 1x USB Power PSU 100-240V
- 1x Mirco usb charger Cable
- 1x English Users Manual
The first from ,
V3.3,V3.8,V4.3, V4.5,V5.1 ,V2.02,V2.03 new
V2.02 , V2.03 is new version , the watt refenece is best than V3.3,V3.8,V4.3, V4.5,V5.1 .
- **All Specifications are subject to change without notice
Anywhere to provide three years of free maintenance
Enquiries Please call the Customer Service Hotline / Whatsapp: 54457217 / Email: cs@409shop.net
 
OPTIONAL :
N to SO239 connect adaptor
N to SMA connect adaptor
N to BNC connect adaptor
DUMMY Load
|
