Mic for Surecom QYT KT-7900D KT-8900D

SW102S+GND

Surecom SW102 Ground Plate

A Ground Plane is a flat surface of ferrous metal (Aluminum, etc) that a  Ground Plate  for heldhand antenna uses as an integrated part of it. A Ground Plate  will be better for testing the SWR .

Package include:
1x 1mm Ground Plate 

SURECOM UV Digital VHF/UHF Power with SW-102S Surecom Ground Plate 

V.S.W.R. meter Introduction

VSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter .
All Funtion display ( Frequency,Power , SWR,FW,RW,Battery Level)

Feature & Specification
Frequency range: 125 - 525MHz
Measurable power range: 0.5 - 120W(+-0.5%)
Input  read frequency counter (must be < 0.5 W)
Maximum power: 120W
Impedance: 50Ω
Size: W 76 X H 77 X D35 mm.
Weight: < 220 grams
Battery : 3.7V Li-ion Rechargeable Battery

* Not for the DMR digital radio.

Interface: SO239

• Power ON/OFF:

• Press 2 second the [Red button] to power on or power off
  
  MENU Dispaly  (Note: Version for up to V3.8)

  No.	Mode	Adj	Default Setting	Content
  1	Adjustment Forward	-99  to  +99	0	Fine Tune Level %
  2	Adjustment Reverse	-99  to  +99	0	Fine Tune Level %
  3	Adjustment Time Base	-99  to  +99	0	Frequency Counter ,OSC Time Base
  4	LCD DIM (Back Light  Time)	0-9	1	"0" is always on,  1 min  to  9 mins
  5	POWER OFF	0-9	3	"0" is always on,  1 min  to  9 mins
  * Supplier, the product will add functionality without having to give notice

   

• Set & Save​:
• ​Press MENU [Blue button]
• Press F1 [Red button)(Select 1-5 Funtion)
• Press [Blue button] ( - ), [Yellow button] (+)
• Press the  [Red button ]for 2 seconds
• Press the  [Blue button] to SAVE and EXIT

•  

• How to check the S.W.R. of your Antenna :
  ​Connect to "TX" on Radio output  and Antenna  to "ANT".  Proper adaptor/cable is required if your device has different type of connectors.
• Measurement V.S.W.R. : (see Pic.1)
• SW-102 TX connect Radio RF out  
• Radio TX , SW-102 with display S.W.R. measure data.
  Do not affect the test in the following cases, there are objects nearby, placed horizontally.
• How to check the output Watt of your transceiver :
  Connect to "TX" on Radio output and dummy Load to "ANT".  Proper adaptor/cable is required if your device has different type of connectors.
• Measurement Power: (see Pic.2)
• SW-102 TX connect Radio RF out  
• SW-102 ANT connect 50 ohm Dummy Load
• Push Radio TX , SW-102 display is Power  measure data.
  (SW-102 is not for DMR system)

•  

• Package Contents
• 1x SURECOM  SW-102-UV Power & SWR Meter  (SO239 - connector)
• 1x Power PSU 100-240V
• 1x Charger Cable 
•  1x English Users Manual

​

The first from  , 
V3.3,V3.8,V4.3, V4.5,V5.1 ,V2.02,V2.03 new 
V2.02 , V2.03 is new version , the watt refenece is best than  V3.3,V3.8,V4.3, V4.5,V5.1 .

**All Specifications are subject to change without notice

Enquiries Please call the Customer Service Hotline / Whatsapp: 54457217 / Email: cs@409shop.net