|
F.O.B. Price NOT includes shipping
After the purchase, we will contact you to pay shipping cost.
YAESU FT-950 HF/50MHz Transceiver
Features
TX Frequency Coverage: 160 - 6 meters
RX Frequency Coverage: 30 kHz - 56 MHz
Operating Modes: USB, LSB, CW, AM, FM
Digital Noise Reduction
Power Output: 5 to 100 watts 160 - 6 meters
Speech Processing
Built-in Electronic Keyer
Built In Antenna Tuner
The Yaesu FT-950 is an elite-class HF transceiver providing exceptional performance both on transmit and receive. The FT-950 is designed for the most competitive operating situations, whether you primarily operate in contest, DX, or digital-mode environments. It is built on the foundation of the popular FTDX9000 transceiver, and carrying the proud tradition of the FT-1000 series, the FT-950 provides up to 100 watts of power on SSB, CW, and FM (25 Watts AM carrier). Digital Signal Processing (DSP) is utilized throughout the design, providing leading-edge performance on both transmit and receive.
The sophisticated receiver section utilizes DSP filtering, incorporating features such as Variable Bandwidth, IF Shift, and Passband Contour tuning. Digital Noise Reduction and Digital Auto-Notch Filtering are also provided, along with a manually-tuned IF Notch filter. On the transmit side, the Yaesu-exclusive Three-Band Parametric Microphone Equalizer allows precise and flexible adjustment of the wave-form created by your voice and microphone. The Amplitude, Center Frequency, and Bandwidth of equalization may be adjusted independently for the low-frequency, mid-range, and high-audio-frequency spectra, and the transmitted bandwidth may also be adjusted, as well. Advanced features include Direct Keyboard Frequency Entry and Band Change, Speech Processor, IF Monitor for Voice modes, CW Pitch control, CW Spot switch, Full CW QSK, adjustable IF Noise Blanker, and all-mode Squelch. Two TX/RX antenna ports are provided on the rear panel. Two key jacks are provided (one each on the front and rear panels), and they may be configured independently for paddle input or connection to a straight key or computer-driven keying interface. The CW Message Memory is provided. The multi-colored display keeps you informed of all radio settings.
Frequency setup is simple on the FT-950. Besides direct frequency entry for both the VFO-A and VFO-B, separate keys are provided for band selection, and each band key accesses three independent VFO frequency/mode/filter settings per band, so you can establish separate VFO settings for three different parts of each band. In addition, 99 memories are provided, each of which stores its own mode and IF filter selection, in addition to frequency, Clarifier offset, and scan-skip status. Also five quick-recall (“QMB”) memories can instantly store operational settings at the push of a button. The built-in automatic antenna tuner includes 100 memories of its own, automatically storing antenna matching settings for quick automatic recall later. There is a dedicated RTTY/PKT connection jack on the rear panel.
The FT-950 requires 13.8 VDC at 22 Amps. This radio comes with the MH-31B8 hand mic, DC cable spare fuses and plugs. 14.4 x 4.5 x 12.4 inches 28.7 lbs.
FT-950 Specifications
GENERAL |
RX Frequency Range: |
30 kHz to 56 MHz |
TX Frequency Ranges: |
160 to 6 m (Amateur bands only) |
Frequency Stability: |
±0.5 ppm (after 1 min. @ 25 °C) |
Operating Temperature Range: |
14 ° - 122° F (-10 °C ~ +50 °C) |
Emission Modes: |
LSB, USB, CW, F3E FM, F1B RTTY, F1D Packet, F2D Packet |
Frequency Steps: |
1/10 Hz for SSB/CW/AM |
0 |
100 Hz for FM |
Antenna Impedance: |
50 ohms balanced, 16.7 to 150 Ohms, unbalanced (Tuner ON, TX only) |
Power Consumption: |
13 VDC |
RX (no signal) |
2.0A |
RX (signal) |
2.5A |
TX (100 W) |
22 A |
Supply Voltage: |
13.8 VDC |
Dimensions (WHD): |
14.4 x 4.5 x 12.4 inches |
Weight (approx.): |
28.7 lbs. |
0 |
TRANSMITTER |
Power Output: |
Adjustable 5 to 100 watts (2-25 watts AM carrier), |
0 |
50% @ 100 watts (FM & RTTY, 3-minute TX) |
Modulation Types: |
J3E (SSB) Balanced, |
|
A3E (AM) Low-level (early stage), |
|
F3E (FM) Variable reactance, |
Maximum FM Deviation: |
±5.0 / ±2.5 kHz |
Harmonic Radiation: |
Better than -60 dB (Typical) |
SSB Carrier Suppression: |
At least 60 dB below peak output |
Undesired Sideband Suppression: |
At least 60 dB below peak output |
Audio Response (SSB): |
Not more than -6 dB from 300 to 2700 Hz |
3rd-order IMD: |
- 31 dB 14 MHz @ 100 watts PEP |
Microphone Impedance: |
600 Ohms (200 to 10k ohms) |
0 |
RECEIVER |
Circuit Type: |
Triple-conversion superheterodyne (VFO-A) |
Intermediate Frequencies: |
0 |
VFO A: |
69.450 MHz/450 kHz/30 kHz [24kHz for AM/FM] |
Sensitivity: |
Modes |
0.5 - 1.8 MHz |
1.8 - 30 MHz |
50 - 54 MHz |
SSB (2.4 kHz) |
2 uV |
0.2 uV |
0.125 uV |
AM (6 kHz) |
6 uV |
2 uV |
1 uV |
FM |
- |
0.5 uV (28-30 MHz) |
.35 uV |
(with RF2 amp on) |
Selectivity (-6/-60 dB): |
Modes |
Min. -6 dB BW |
Max. -60 dB |
SSB |
2.4 kHz |
3.6 kHz |
AM |
6 kHz |
15 kHz |
CW/RTTY/Packet |
500 Hz |
750 Hz |
FM |
15 kHz |
25 kHz |
IF Rejection (1.8 ~ 30 MHz): |
|
Image Rejection (1.8 ~ 30 MHz): |
70 dB or better (160-10m) |
Maximum Audio Output: |
2.5 W into 4 Ohms with <10 % THD |
Audio Output Impedance: |
4 to 8 Ohms |
Specifications are subject to change, in the interest of technical improvement, without notice or obligation. |
Package include:
1x FT-950
1x Mic
1x Power cable
1x English manual
Enquiries Please call the Customer Service Hotline / Whatsapp: 54457217 / Email: cs@409shop.net
|