SW-102N+S094+S050+5-806-037
SURECOM SW-102 N frequency counter and power meter + ADAPTOR X2 + Ground Plate
FREE ADAPTOR FOR KENWOOD RADIO
V.S.W.R. meter Introduction
VSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter .
All Funtion display ( Frequency,Power , SWR,FW,RW,Battery Level)
Feature & Specification
Frequency range: 125 - 525MHz
Measurable power range: 0.5 - 120W(+-0.5%)
Input read frequency counter (must be < 0.5 W)
Maximum power: 120W
Impedance: 50Ω
Size: W 76 X H 77 X D35 mm.
Weight: < 220 grams
Battery : 3.7V Li-ion Rechargeable Battery
* Not for the digital radio.
| Feature & Specification (for version 2.02) |
| MAX. Power in |
120 W (Measurable power,Radio must be ANALOG) |
| V.S.W.R |
1.00~19.99 |
| Frequency Ranger |
COVER : 125MHz~525MHz |
| Insertion Loss |
< 0.15dB(VHF) , < 0.25dB(UHF) |
| Temperature |
0℃~60℃ |
| Frequency counter |
Yes ( TX input must be minimum 0.5W + - 0.5%) |
| Battery Display |
Yes |
| Battery Build-in |
3.7V Li-ion Battery |
| Auto Power Off |
1-9 mins |
| Size |
66*68*37 (mm) |
| Charger in |
5V (micro usb) |
| Backlight |
AUTO OFF |
| Interface (in and out ) |
SO239 |
| Weight |
220g (include battery) |
Power ON/OFF:
Press 2 second the [Red button] to power on or power off
| MENU Dispaly (Note: Version for up to V2.02) |
| No. |
Mode |
Adj |
|
Content |
| 1 |
Adjustment Forward |
-99 to +99 |
0 |
Fine Tune Level % |
| 2 |
Adjustment Reverse |
-99 to +99 |
0 |
Fine Tune Level % |
| 3 |
Adjustment Time Base |
-99 to +99 |
0 |
Frequency Counter ,OSC Time Base |
| 4 |
LCD DIM (Back Light Time) |
0-9 |
1 |
"0" is always on, 1 min to 9 mins |
| 5 |
POWER OFF |
0-9 |
3 |
"0" is always on, 1 min to 9 mins |
* Supplier, the product will add functionality without having to give notice |
Set & Save:
Press MENU [Blue button]
Press F1 [Red button)(Select 1-5 Funtion)
Press [Blue button] ( - ), [Yellow button] (+)
Press the [Red button ]for 2 seconds
Press the [Blue button] to SAVE and EXIT
How to check the S.W.R. of your Antenna :
Connect to "TX" on Radio output and Antenna to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
Measurement V.S.W.R. : (see Pic.1)
SW-102 TX connect Radio RF out
Radio TX , SW-102 with display S.W.R. measure data.
Do not affect the test in the following cases, there are objects nearby, placed horizontally.
How to check the output Watt of your transceiver :
Connect to "TX" on Radio output and dummy Load to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
Measurement Power: (see Pic.2)
SW-102 TX connect Radio RF out
SW-102 ANT connect 50 ohm Dummy Load
Push Radio TX , SW-102 display is Power measure data.
(SW-102 is not for DMR system)
Package Contents
1x SURECOM SW-102-UV Power & SWR Meter (N - connector)
1x Power PSU 100-240V
1x Charger Cable
1x English Users Manual
2x ADAPTOR for kenwood BNC radio
1x Ground Plate
Enquiries Please call the Customer Service Hotline / Whatsapp: 54457217 / Email: cs@409shop.net
 
|
