| |
4.3" LCD Display NanoVNA VNA NANOVNA-F HF VHF UHF Vector Network Analyzer Antenna Analyzer Aluminum Case 5100mAh Battery
Features
• Standard aluminium housing to protect SMAhead and reduce the interference of external electromagnetic waves to instrument.
• The NanoVNA-F measurement ranges is 50k-1.5GHz. Use the harmonic of the clock chip SI5351 to measure frequency up to 1000MHz. At 600M-1GHz, the S11 has a dynamic ranges of 40dB (the standing waves ratio is less than 1.02).
• The RF front end is designed with a metal shield that allows the S21 to have a dynamic ranges better than 60dB over the full frequency ranges.
• NanoVNA-F firmware release 0.0.5, measuring frequency to 1.5GHz!
1.support measurable frequency to 1.5 GHz, default setting 1 GHz, accurate measurement up to 1.35GHz.
2.fix: unexpected 0.3dB offset of s21 in thru
3.fix: mark all off bug
4.fix: clutter display when standing wave ratio is infinite
5.add version & info command
6.add REAL IMAG R X trace format
For more information, visit: http: //deepelec.com/2019/12/30/nanovna-f-0_0_5/
NanoVNA-F hardware features include the following improvements:
1. Use 4.3-inch IPS TFT LCD screen, the viewing angle is larger, and you can see clearly under the strong outdoor light;
2. Switch to a large-capacity 5000mAh/3.7V lithium battery, with longer standby time, and at the same time extend a USB interface, which can be used as a charging treasure when the instrument is not usually used
3. Switch to a high-current 2A charging IC, the charging time is shorter;
4. Switch to a larger pulsator with better operation feeling;
5. Switch to a larger power switch with better operating sense;
6. Support Chinese and English menu switching;
7. Upgrade user program through virtual U disk;
8. The aluminum shell is equipped as standard to protect the SMA head and reduce the interference of external electromagnetic waves on the instrument;
9. Software open source : https://github.com/flyoob/NanoVNA-F
Specification
Main material: PCB
Color: black
Type: with battery
Battery: 1 * lithium battery, 3.7V, 5000mAh
Measurement frequency: 50KHz~1500MHz
RF output: -13dBm (Max.-9dBm)
Frequency accuracy: <0.5PPM
Port SWR: ＜1.1
Display: 4.3 inch IPS TFT (800*480)
USB interface: USB Type-C
Communication mode: CDC (serial)
Power consumption: USB 5V 200mA, can use battery powered, maximum charging current 2A
Output capacity: 5V/1A
Number of calibration points: 101
Number of scanning points: 101
Display tracking: 4, Marking: 4, Setting save: 5
Scanning time: about 1.9s/time (50KHz~1000MHz full frequency band)
Can measure S parameters, voltage standing waves ratio SWR, phase map, group delay, Smith chart and so on.
Item size: 140 * 75 * 20mm / 5.5 * 3.0 * 0.8in
Package size: 145 * 85 * 30mm / 5.7 * 3.3 * 1.2in
Package weight: 413g / 0.9lb
Packing Included
1 * Host
2 * 200mm SMA-JJ RG316 Cable
1 * Set of Calibration Parts
1 * SMA-JJ Double Needle
1 * SMA Elbow (external screw inner hole to inner screw inner needle)
1 * Type-C Data Cable
|
