0014-0178
NANOVNA V2 Antenna Analyzer Shortwave HF VHF UHF Measure Duplexer Filter
Features:
1. Metal case; large-screen touch is more accurate; easy to operate, no need to connect power supply, get rid of the shackles of the data cable, can be used alone. Powerful function: The product can measure 2.4G antennas, and can also measure duplexer and filter .
2. Practical DIY product: This is a practical DIY product with perfect vector network measurement function, and it is light and portable; independent 3.2-inch LCD display, portable battery or USB power supply, and can be used offline for 2 hours .
3. Multiple functions: You can export Touchstone (snp) files from PC software for various radio design and simulation software. This function is used for antenna performance measurement.
4. Better dynamics: The direct output of si5351 in the frequency range of 50k-300MHz provides dynamics better than 70dB, the extended 300M-600MHz frequency band provides dynamics better than 60dB, and the 600M-900M frequency band is better than 50dB Dynamic.
5. Wide range of frequencies: The improved frequency algorithm can use the odd harmonic expansion of si5351 to support measurement frequencies up to 900MHz. The TX/RX method measures complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
Specification:
NanoVNA V2
The second-generation NanoVNA vector network analyzer is based on OwOComm's S-A-A-2 design, and its performance is greatly upgraded.
Measuring frequency range: 50kHz-3GH
System dynamic range (after calibration): 70dB (50k to 1.5GHz); 60dB (to 3GHz)
S11 background noise (after calibration): -50dB (to 1.5GHz); -40dB (to 3GHz)
Scan rate: 100 points/
Number of scanning points (on device screen): adjustable, maximum 201
Number of calibration points (maximum number of USB scanning points): 1024
Power supply: USB, 1950MAH
RF port: SMA (not RP-SMA!)
USB interface: Micro USB
Display screen: 3.2 inch TFT (320 x 240)
Port 2 Return loss: >= 13dB (to 3GHz), 20dB (to 1.5GHz)
Package Contain:
1x Vector Network Analyzer
2x 300mm RF Cable SS405 SMA Double Male Needle
1x USB Data Cable
1x Calibration Kit (50Ω Load)
1x Calibration Kit (Short)
1x Calibration Kit (Open)
1x SMA Female to Female Connector
Enquiries Please call the Customer Service Hotline / Whatsapp: 54457217 / Email: cs@409shop.net
 
|
